Lutron RadioRA 2 RR-15APS-1 Plug-In Appliance ModuleLutron | RA2 Select | RadioRA 2 |
1-receptacle appliance switching module 1/2 HP or 15A
RadioRA 2 RF Plug-in Modules are simple to install and easy to use. RF Plug-in Modules allow floor and table lamps (RR-3PD-1) as well as general purpose switching loads (RR-15APS-1) to be added to a system quickly and easily using Clear Connect RF Technology. They can be hidden behind furniture or appliances.
The RadioRA 2 Dimming Module (RR-3PD-1) functions much like standard lamp dimmers, but also incorporates advanced features such as fade-on/fade-off, delayed long fade-to-off, and rapid full on. The RadioRA 2 Appliance Module (RR-15APS-1) switches up to 15 A of general purpose loads. It features Lutron’s patented Softswitch technology to prevent the relay contacts from arcing, extending the average life of the switch.
• On a single-tap of the toggle button, load toggles ON or OFF.
• The appliance module may be used with, but is not limited to, the following: – Task lighting – Humidifiers – Monitors – Fans – Printers
Note: Refer to the manufacturer’s guidelines for acceptable switching methods.
• The appliance module may NOT be suitable for use with devices that require any of the following: – Shut-down process before power is interrupted, such as computers. – Cool-down process before power is interrupted, such as projectors. – Programming, such as clocks or DVRs. – Long warm-up cycle.
• If an over-temperature condition is detected, the LED on the unit will flash a unique sequence (double-blink, then pause) and turn the load off. Proper installation and conformance to all specifications should be ensured before proceeding. To return the device to normal operation, cycle power to the device