Lutron RMJS-8T-DV-B-EM Vive PowPak 120/277V, 8A, 0-10V Dimming Module

Vive PowPak 120/277V, 8A, 0-10V Dimming Module.

The PowPak Dimming Module with 0–10 V- Control is a radio frequency (RF) control that operates 0–10 Vcontrolled fluorescent ballasts or LED drivers based on input from Pico remote controls and Radio Powr Savr sensors. The Dimming Module with 0–10 V- Control is ideal for small areas (e.g., classrooms, conference rooms, private offices).

Communication with RF input devices (e.g., Pico remote controls, Radio Powr Savr sensors) is accomplished by using Lutron Clear Connect RF Technology.

These products are also compatible with the Vive hub which enables a simple setup process using a standard web browser on any Wi-Fi enabled phone, tablet or computer. It also enables control and monitoring of all Vive devices. The Vive hub can be added at any time. System reprogramming will be required. For a complete list of features supported with the Vive hub, see specification submittal 369902 at www.lutron.com Note for Replacement: RMJS/URMJS - the “S” model can replace the non-”S” model.

Documentation

Features

• Controls up to 60 mA of 0–10 V- controlled fixtures together • New model available for use with emergency lighting

• Switches up to 8 A total

• 0–10 V- control link automatically sources or sinks to the third party fixtures

• Configurable high- and low-end trim

• Various operating voltages available; refer to model number chart on the next page for details on voltage requirements

• Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor

• Utilizes Lutron Clear Connect RF Technology; refer to model number chart on the next page for frequency band data

• Mounts to the exterior of a US-style junction box through a standard-size knockout

Emergency Model Sequence of Operation With a Vive hub:

• Normal mode: The RMJS-8T-DV-B-EM can dim loads as normal and respond to local button presses, Pico wireless controls, and occupancy /daylight sensors. • If the emergency PowPak loses power for greater than 250 mS, it will automatically go into emergency mode (full output, relay closed), when emergency power is restored to the PowPak, for as long as the Vive hub has no power. All local buttons, Pico wireless controls and occupancy /daylight sensors will not respond. The emergency light level of the emergency PowPak can be configured using the Vive hub.

• When normal power is restored to the Vive hub and emergency PowPak, the emergency PowPak will return to the previous light level in most cases within 3 minutes, but guaranteed within 10 minutes of normal power being restored. It will again accept local button control, input from Pico wireless controls, and occupancy /daylight sensors.

Without a Vive hub:

• Normal mode: The RMJS-8T-DV-B-EM can dim loads as normal and respond to local button presses, Pico wireless controls, and occupancy /daylight sensors.

• If the emergency PowPak loses power for greater than 250 mS, it will automatically go into emergency mode (full output, relay closed) for 90 minutes, when emergency power is restored to the PowPak. All local buttons, Pico wireless controls and occupancy / daylight sensors will not respond for 90 minutes.

• When normal power is restored, the emergency PowPak will remain in emergency mode for 90 minutes (full output, relay closed). It will then return to the previous light level and accept local button control, inputs from Pico wireless controls, and occupancy /daylight sensors.